这些教程涵盖了汽车造型设计专业所需的关键工具和技术。主要是为初学者设计的，或作为从产品设计到汽车建模的过渡内容。

• Switch to the Section 2 Workflow Tutorials

• Download the Data Files for the Fundamentals Tutorials

• View the Installation Instructions

F1 Interface Fundamentals

• Introduction to F1 Tutorials

• F1.1. Using the Alias File System

• F1.2. Zooming, Panning and Tumbling the Scene

• F1.3. Organising Parts onto Layers

• F1.4. Selecting and Grouping - Importing Wheels

• F1.5. Moving, Scaling and Rotating the Wheels

• Interface and Problem Solving Tips

• Download the Data Files for F1

F2 Geometry Fundamentals

• Introduction to F2 Tutorials

• F2.1. XYZ Dimensions and Accuracy

• F2.2. Circles and the Information Window

• F2.3. Importing a Polygon Mesh & Local Axes

• F2.4. Pivots Points and Grouping

• F2.5. Snapping with Mouse Constraints

• F2.6. CV Sculpting a Cylinder

• F2.7. Construction Planes - Working on an Angle

• F2.8. CV Sculpting Cubes and Groups

• Using the Marking Menus and Shelves

• Download the Data Files for F2

F3 NURBS Fundamentals

• Introduction to F3 Tutorials

• F3.1. NURBS Surfaces 1 - Degree and CVs

• F3.2. NURBS Surfaces 2 - Symmetry

• F3.3. NURBS Curves -   Spans and Edit Points

• F3.4. Edit Point Curves - Car Outline Curves

• F3.5. Curve Tools - Offset and Trim

• F3.6. Wheel Arch Curves

• Skill Builder 3.7 - Multi-Span Curves

• Skill Builder 3.8 - Multi-Span Surfaces

• Interface Shortcuts - Customising Shelves

• Download the Data Files for F3

F4 Projecting, Intersecting and Trimming

• Introduction to F4 Tutorials

• F4.1. Projecting and Trimming Surfaces

• F4.2. Intersecting and Trimming Surfaces

• F4.3. Trimming the Wheel Arches

• F4.4. Trimming the Side of the Car

• Skill Builder 4.5 - Intersecting the Roof Line

• Skill Builder 4.6 - Trim Divide

• Skill Builder 4.7 - Fitting the Side Surface

• Interface & Trimming Tips

• Download the Data Files for F4

F5 Building with Curves & Surface Tools

• Introduction to F5 Tutorials

• F5.1. Skin Surface & Construction History

• F5.2. Skin, Planar & Draft Surfaces

• F5.3. Skin & Draft for Sketch Surfaces

• F5.4. Swept Surface : Mono-Rail

• F5.5. Boundary Surfaces : Bi-Rail & Square

• F5.6. Revolve Surface - Wheels

• F5.7. Revolve Surface - Side Glass

• Skill Builder 5.8 - Parallel Roof Line

• Interface & Surfacing Tips

• Download the Data Files for F5

F6 Continuity : Aligning & Matching

• Introduction to F6 Tutorials and the Align Tool

• F6.1. Curve Fillet & Continuity

• F6.2. Bi-Rail Surface & Continuity

• F6.3. Surface Fillet and Round

• F6.4. Introduction to Freeform Blend

• F6.5. Freeform Blend - Wheel Arch Layout

• F6.6. Construction Tolerances, Square and Align

• F6.7. Introduction to Blend Curves

• Skill Builder 6.8 - Detailing the Roof Window

• Skill Builder 6.9 - Rail : Patch Layout & Problem Solving

• Skill Builder 6.10 - Rail : Curve Segments on the Front Bumper

• Skill Builder 6.11 - Completing the Front Wheelarch Blend

• Interface & Problem Solving Tips

• Download the Data Files for F6

Fundamentals Skill Builder Projects

• Introduction to the Skill Builder Projects

• Download the Fundamentals Project data files

  
  

以上链接如不能够打开，请联系微信号：215128930